Advertising on the portal

Download mk edit. McEdit - Create your own Minecraft maps. Interface and usage

When working with maps for playing minecraft, we often need to cut out certain areas, add new biomes, do regeneration and much more. Standard game tools and plugins do not always help, so you have to use third-party software. Today I want to tell you about the program MCEdit 0.1.7.1 minecraft... This program will allow you to operate with millions of blocks at the same time without any load on the processor and RAM of the computer. You've probably noticed more than once that in a single player, and in a multiplayer minecraft game, maps take a long time to load. Is that so, right?

With this, you can avoid such problems. Now I will tell you an example of using this software. Let's say we need to copy a building to the server. The problem is that the map is in a single-player game, and we need to transfer some part of the building to a server where people play on the Internet on one joint project. So, such a problem can be solved in a few minutes using the MCEdit program. Load the map, which contains the future building for the transfer. Next, download the program from our website. We install it on a personal computer and run it.

Now what? Now you need to specify the path to the map. Open it in the editor. Within a few seconds, the entire map will be loaded for editing. Be extremely careful. You need to select a certain area of ​​the territory, which will be copied later to the server. To do this, you need to select the territory diagonally. Use mouse keys to highlight and Backspace to move with control buttons. Ready? Now click on the Save button. Be sure to name the future file and save it in the "schematic" format.

Next, I'll tell you how to transfer this file to the server. Go through ftp access to your minecraft server. Find the plugins folder. In it, go to the section. This is a special plugin that allows us to work with different block sizes on the server. Now copy the saved file into this folder. Subsequently, you will need to go to the server and enter the command // schematic load name.schematic, where name is the name of your saved file. As soon as a piece of the map is loaded into the clipboard, you will need to enter the // paste command and the building will be inserted.
This is what this utility is for. Download MCEdit for minecraft you can on our website completely free of charge. We follow all updates and post new versions of programs.

Download MCEdit - Minecraft World Editor

Is an open source world editor for just about any version of Minecraft. was first created to allow players to preserve anything built with several old versions of Minecraft and take them forward into newer versions of the game. It also aims to be forward-compatible with future (or even modified) versions of Minecraft. It has since been improved with brush tools for laying down blocks in different shapes, integration with the Minecraft Server to generate terrain using Minecraft's own seed algorithms, support for multiplayer worlds, and editors for certain blocks including chests and mob spawners.

Features:

  • Navigate the world using familiar WASD controls and mouse aiming.
  • Show the locations of dropped items, game entities including monsters and villagers, hidden ores, plus blocks with TileEntities and other Minecraft internals.
  • Load saved games from current Minecraft versions, plus the older Classic and Indev versions.
  • Limited support for Minecraft Pocket Edition saved games
  • Export blocks and game entities as a .schematic file to be imported by MCEdit or compatible programs.
  • Automatically fixes wool colors when importing and exporting between Minecraft PC, Classic, and Pocket editions!
  • Double-click on a chest to change its contents, or double-click on a mob spawner to choose what spawns.
  • Brush tool “paints” blocks in a round, diamond, or square shape with configurable size. Different brush modes will add new blocks, replace blocks, alter the top layer of the terrain or wear it down to smooth out rough objects.
  • “Paste” brush allows you to import an object with a single click.
  • “Flood Fill” brush will change all blocks that form a connected mass.
  • Clone tool makes a copy of blocks and entities, optionally making multiple clones in a line or scaling the copy up or down.
  • Clone and Import tools can rotate an object around any axis, or flip it horizontally or vertically.
  • “Filter” plugins let users add functionality to MCEdit by writing Python code.
  • Move the world’s spawn point, automatically removing blocks to make sure the spawn point is acceptable to Minecraft.
  • Move and rotate any player in a single- or multiplayer world.
  • Expand or contract the world’s size by adding or deleting chunks. Chunks are the basis of Minecraft's “infinite” saved game format.
  • Create new worlds or add chunks to existing worlds. The Minecraft Server can be harnessed to create natural terrain that meshes with the world’s existing seed. Flatlands can also be created at any height.
  • “Analyze” feature counts the block and entity types in a selected area, optionally saving them to a .csv file.
  • Maintenance commands can delete all blocks, entities, or chunks in a selected region. This is useful for getting a “corrupted” world back into a playable state.



To get an idea of ​​what MCEdit can do, just watch this tutorial / walkthrough by a famous mapmaker:

Developer: codewarrior

To download the latest MCEdit or report any problems you may have, head over to theofficial site.

MCEdit 0.1.7 released.

MCEdit version 0.1.7 is now available from the links to the left, or via automatic update. Here is a summary of the changes made since 0.1.6:

(0.1.7.1 fixes a startup error for certain system configurations and non-English usernames.)

  • Block IDs up to 4096 are now preserved
  • Hold ALT to show full NBT tags and Item structures when mousing over a tile entity
  • Names and info for blocks added in Minecraft 1.5
  • “Undo Limit” setting
  • “Record Undo” option on the main screen
  • “Copy Biomes” option for import / clone tools (.schematic file changed to have Biomes array)
  • “MCEdit” menu button
  • Scrollable filters menu
  • Rotation data for several new blocks
  • Missing graphics when MC 1.5 texture packs are selected
  • “Copy Air” and “Copy Water” settings no longer cause blocks with ID> 255 to be destroyed.
  • Flickering black screen on some systems
  • Missing plant and grass graphics on some systems.
  • Entities have wrong positions in schematics after rotating
  • Captured mouse cursor is correctly released when editor closes
  • Biomes array is added to chunks that don’t have one
  • “Repair Regions” button appears again for Anvil levels
  • “Analyze” counts the different data values ​​of unknown blocks
  • UI elements no longer disappear when the window is too small to display them

MCEdit 1.0 released:

Hotfix

  • Fixed rough graphics issue that could cause chunk errors
  • Fixed pocket slabs not showing correctly
  • Fixed certain high block IDs being invisible if hidden ores were enabled
  • Fixed crash when pressing the block information key when there is no block under the cursor
  • Improved Linux installer's leveldb handling
  • Fixed a filter tool crash
  • Added pillar quartz sideways directions for pocket edition
  • Added missing pocket blocks up to 0.12 b5

Do you want to build something big and beautiful, but it takes a long time to build by hand? There is a way out - the program MCEdit, which will greatly simplify the construction and save your time.

Installation

In order to work with the program, it must be copied to the computer. This can be done in two ways:

  1. The first is to download the installation file and run it. After that, you need to choose the place to install the program and wait about a minute. That is, this is the usual setting;
  2. The second way is to download the archive and unpack it to the desired location. I like this method better, since I have to tinker less, and even when uninstalling the program, I don't have to delete shortcuts and clean registry entries. That is, this is the installation of the portable version.

First start

So, let's start. A black window with yellow captions will appear.

We need the inscription "Open a level ..." with its help we will open the one we need. How to do it? Click on the inscription, and find the folder with minecraft (% appdata% /. Minecraft /). After that, go to the saves folder, and then to the map folder. The file level.dat will be there and we open it. If the file is not damaged, a map will appear. An example on the screen:

Basic tools

  • After loading the map, 9 squares with icons will appear at the bottom of the window. These are the tools. The first one (left) is excretion... It allows you to highlight the required area of ​​the map. To do this, move the cursor over the required cube and press the left mouse button. Then, holding down the right mouse button to rotate, and using the W, A, S or D buttons, you need to move to another area and click on another cube with the left mouse button. Thus, the area in the form of a parallelogram will be highlighted;
  • The next tool is brush... It can be used to place, delete or replace cubes. After selecting it, a window for selecting options will appear on the left. There you can select the shape of the brush - for this you need to click on the yellow inscription to the right of the brush inscription. You can also change the size of the brush, for this you need to enter the numbers you need to the right of the letters L, W, H;
  • Another tool you need is copying... To use it, you must first select an area, and then double-click on copy. A copy of the selection appears, but with a green tint. In the window on the left, you can rotate the object in three planes, and also flip it horizontally or vertically. After that, moving the mouse, select the place where the object should be placed, and press the left mouse button. Then you can move the object by entering your values ​​in the forms to the left of the nudge label. Then you need to confirm the copying by clicking on the yellow inscription Clone;
  • There is also a tool FILL... It allows you to modify cubes in the selected area. To use it, you need to select an area and click on the FILL button. Then you need to select the required cube in the window that appeared in the center and click on OK, and then on FILL in the window on the left. This will replace the entire selection with the selected cubes;
  • There is a Filter tool, but we will not need it, since it is intended for the minecraft classic version;
  • The button labeled Import allows you to import a schematic scene that is created by another program, which will be discussed in another article. For example, you can create a ring, or a bridge, and then insert it into the game;
  • The next 2 tools and images of the player's head allow you to move both the player himself and the spawn point in which he will appear after death;
  • Well, finally, the last tool is chunk control. He, too, will not be needed in construction;
  • The only option I use is Relight, which allows the lighting to be recalculated in the chunk.

Personal opinion

In my opinion, the program is very useful. It saves a lot of time, especially when you need to make large walls or put many identical objects. But the program has 2 big drawbacks. Recently a minecraft snapshot was released, with the new anvil map format. And this program doesn't support it. In addition, in this picture the maximum height of the world has become not 128, but 256, but MCEdit can only build up to 128. I hope the developers will fix this soon.

We present you one of the most useful programs for Minecraft. MCEdit is not only a map editor, but also a must-have for all those who like to experiment. What are the functions in this program? The simplest thing is to create cubes and balls of any size from absolutely any blocks that can be placed anywhere. MCEdit has uninstall and replace functions. They allow you to quickly clear the area for buildings and replace all blocks of earth in the selected square, for example, with blocks of stone. With the help of special filters, you can change the location of biomes. Do you want snow near your house, rain in the backyard, and Gasta and Snozombi spawn in the basement? Then you definitely need to use filters, and these are far from all the possibilities. You can clone buildings, move them to the right places, change spawn, change the location of players, change the contents of chests and much more!

On our site you can download MCEdit for Minecraft versions: 1.5.2, 1.6.4, 1.7.2, 1.7.10, 1.8, 1.8.1 and others. A video review will help you understand how to use the program. He should answer all your questions.

Instructional video

Windows 32 bit

Windows 64 bit